Ai-Sonic BT-A230 2x45W RMS 230V Bluetooth amplifier
- Power: 2x 30W RMS @ 8 ohm / 2x 45W RMS @ 4 ohm / 1x 90W RMS Bridged
- Frequency response: 20 to 20,000 Hz
- Bluetooth 5.0, USB connection: MP3, WAV, APE, FLAC, WMA
- Dimensions: 33 x 97 x 150 mm
Available online only
Shipping costs starting from
4,90€
Do you want a Bluetooth amplifier for terrace speakers, sauna speakers, bathroom speakers or garage speakers? Or a more powerful amplifier for computer speakers? Or build a simple sound system for example in a bedroom, children's room, student room or in the gym you built in the basement?
Ai-Sonic BT-A230 is the perfect solution as an amplifier if you want to listen to music via Bluetooth. The small physical size makes the device very easy to place in practically any space. In addition to Bluetooth, the sound sources are USB.
You can connect a memory stick to the USB connection, you can change songs with the included remote control. The remote control needs line of sight to the amplifier, it works with infrared. RCA Line-out connectors enable, for example, the connection of active speakers or an active subwoofer to the amplifier.
However, the best feature is Bluetooth 5.0, through which you can get high-quality sound wirelessly from your phone, tablet, computer and almost anywhere.
The power of the device is sufficient to play any conventional speakers, even at high volume. You can also play loudly without worry, because the power supplied by the amplifier to the speakers is not distorted. If the output signal begins to distort, the amplifier automatically limits the level so that the signal remains clean. Automatic limitation also takes care of situations where the amplifier starts to heat up too much. The speaker lines have short-circuit protection. If the speaker cable is damaged, the device automatically protects itself. If you want even more power, you can bridge the amplifier (minimum load 8 ohm).
Bluetooth's range in unobstructed conditions is approx. 20 meters
Ai-Sonic BT-A230 is the perfect solution as an amplifier if you want to listen to music via Bluetooth. The small physical size makes the device very easy to place in practically any space. In addition to Bluetooth, the sound sources are USB.
You can connect a memory stick to the USB connection, you can change songs with the included remote control. The remote control needs line of sight to the amplifier, it works with infrared. RCA Line-out connectors enable, for example, the connection of active speakers or an active subwoofer to the amplifier.
However, the best feature is Bluetooth 5.0, through which you can get high-quality sound wirelessly from your phone, tablet, computer and almost anywhere.
The power of the device is sufficient to play any conventional speakers, even at high volume. You can also play loudly without worry, because the power supplied by the amplifier to the speakers is not distorted. If the output signal begins to distort, the amplifier automatically limits the level so that the signal remains clean. Automatic limitation also takes care of situations where the amplifier starts to heat up too much. The speaker lines have short-circuit protection. If the speaker cable is damaged, the device automatically protects itself. If you want even more power, you can bridge the amplifier (minimum load 8 ohm).
Bluetooth's range in unobstructed conditions is approx. 20 meters
- Speaker impedance: 4-8 ohm
- Operating voltage: 230 V
- Power: 2x 30W RMS @ 8 ohm / 2x 45W RMS @ 4 ohm / 1x 90W RMS Bridged
- Frequency response: 20 to 20,000 Hz
- Distortion: THD 0.1%
- Input sensitivity: 0.2 - 10 V
- Sound controls: Treble control +- 10 dB @ 10 kHz, Bass control +- 10 dB @ 100 Hz
- Bluetooth 5.0
- USB interface: MP3, WAV, APE, FLAC, WMA
- Dimensions: 33 x 97 x 150 mm
- External power supply dimensions: 31 x 56 x 127
- Power cord length: 2 m
- Designed in Finland by AI-Group
- Power, W: 90
- EAN: 6430042123957
- SKU: 102060702
- Vendor material number: BT-A230
Payment Methods:
