Benelli Super Black Eagle 3-series Comfortech blocked Camo Max-7 patterned shotgun. Magnum 28″ interchoke (interchangeable breech) barrel. Comes standard with 5 interchoke interchangers, 3 of which are fully internal and 2 are internal/external with spindle.

SBE 3 Comfortech is suitable for all shotgun hunting. The lower part of the gun's breech frame is made of ERGAL and the upper, the cover part, is made of special steel and is integrally attached to the barrel. On the right side of the breech frame is the model name SUPER BLACK EAGLE 3.

The barrel is made 100% in Italy from Italian nickel-chromium-molybdenum special steel and both barrel and suppressors are cold-finished. The barrel rail is a raised forest rail. The barrel has a small red fibre core. The chamber length is 89mm (3 1/2″) and the gun is suitable for normal, magnum and supermagnum cartridges. The SBE3 model has screw holes on top of the bolt body, making it very easy to install the Picatinny rail, which is an accessory. The barrel reducers are cold-formed 7cm/9cm long Crio reducers.

The model's new Comfortech 3 buttstock is patented by Benelli and developed to reduce recoil in the gun. The Comfortech 3-supports are made of durable fibreglass reinforced plastic (Rilsan). The stock has thirteen synthetic recoil absorbing "boomerangs" running through the butt. Thanks to a new polyurethane rear plate developed by Benelli, a new softer Comptech cheekpiece and the Comfortech support, recoil has been reduced by tens of percent. Barrel rise has also been significantly reduced, making it quicker to refocus the gun. The forend and forend plug have been redesigned and the ergonomics of the forend ensure an optimal and balanced grip.

The trigger guard of the SBE 3 model has been redesigned for easy use of the gun. The weapon has a two-piece, spring-loaded cartridge holder plate, making it easier to feed cartridges into the magazine and removing them from the magazine (from below) much easier and more user-friendly than was the case with the SBEII model. The Easy Locking bolt is familiar from the Raffaello-13 series and will rotate all the way even if the bolt is closed quietly by hand. The gun is therefore always ready to fire. The tuning lever and lock closing button are larger than on the SBEII model.

The drop of the barrel is adjustable with the standard rear adjustment pieces to 50-64 mm from the sight line, and the bend can be changed to suit either right or left hand shooters. The standard baseplate of the Takatuk is 2.5cm thick. With the standard rear plate fitted, the gun has a length of pull of 365mm. Optional longer (+1cm) and shorter (-1cm) rear plates are available. The design of the gun allows for the installation of extension kits. The SBE 3 series is supplied in a black plastic transport bag.