Blue Sea automatic charging relay ACR 120A
Available online only
Shipping costs starting from
3,90€
SI-ACR AUTOMATIC CHARGING RELAY - 12/24 V DC 120 A
Automatically connects the batteries during charging and isolates the batteries from each other during discharge and starting the engines.
CHARACTERISTICS
• Protects sensitive electronic equipment by momentarily isolating consumables from the engine's starting circuit during start-up
• Suitable for both 12 V and 24 V systems
• Automatic voltage level selection (12/24 V)
• Hermetically protected contacts/protected against gases and vapors
• Non-sparking — safe even in boats with gasoline engines
• Supports powerful chargers max 120 A
• Two detection circuits
OPTIONAL FEATURES
• Start-up isolation isolates consumables from the motor's starting circuit during start-up and protects equipment during voltage spikes and dips
• Remote LED indicates ACR status - requires LED to be ordered separately
TECHNICAL INFORMATION
Nominal voltage: 12V DC | 24V DC
Boot isolation: Yes
Current consumption in operating mode: 175mA (connected) | 15mA (open)
Connection nut torque: 15.82 Nm
Continuous current: 120 A
Instantaneous current: 210 A (5 min)
Required cable size: 53.5mm²
Ring connector diameter: 28.45 mm
Ring connector pin length: 22.23 mm
Ring connector size: M10
Automatically connects the batteries during charging and isolates the batteries from each other during discharge and starting the engines.
CHARACTERISTICS
• Protects sensitive electronic equipment by momentarily isolating consumables from the engine's starting circuit during start-up
• Suitable for both 12 V and 24 V systems
• Automatic voltage level selection (12/24 V)
• Hermetically protected contacts/protected against gases and vapors
• Non-sparking — safe even in boats with gasoline engines
• Supports powerful chargers max 120 A
• Two detection circuits
OPTIONAL FEATURES
• Start-up isolation isolates consumables from the motor's starting circuit during start-up and protects equipment during voltage spikes and dips
• Remote LED indicates ACR status - requires LED to be ordered separately
TECHNICAL INFORMATION
Nominal voltage: 12V DC | 24V DC
Boot isolation: Yes
Current consumption in operating mode: 175mA (connected) | 15mA (open)
Connection nut torque: 15.82 Nm
Continuous current: 120 A
Instantaneous current: 210 A (5 min)
Required cable size: 53.5mm²
Ring connector diameter: 28.45 mm
Ring connector pin length: 22.23 mm
Ring connector size: M10
- EAN: 632085076108
- SKU: 102315452
- Vendor material number: 9514801168
Payment Methods:
