The use of magnetic varnish in gel varnish Depending on the magnetic polish, to get the best result, some magnetic polishes need a black color on the base. In magnetic varnishes, you can put either a normal layer of false or one layer of magnetic varnish on the bottom. The magnet is used in the upper magnetic varnish layer before the product hardens. If you are not satisfied with the pattern you have made, you can activate the varnish by wiping it again with a damp brush, and the magnetic pigments will return to the surface of the varnish. Make the pattern on one nail at a time, otherwise the pattern will start to fall apart and the effect will not be as precise. You can quickly harden the varnish by always giving the nail about 10 seconds at a time and finally hardening all nails for normal time. Do not quick cure anything other than clear/transparent or magnetic varnishes. Normal color varnishes do not harden properly if they are surface-cured first, because light does not penetrate the top layer of the varnish.
Use:
1. Push the cuticles away from the top of the nail and cut the dry skin if necessary with BLUESKY cuticle cutters. 2. Shape the tip of the nail and lightly roughen the surface of the nail using the BLUESKY block or buffer file. 3. Clean the surface of the nail with BLUESKYN Cleanser cleaning pads. 4. Apply a thin layer of BLUESKY gel base coat to the nail, starting from the middle of the nail and push the brush towards the cuticle line. Press the brush lightly so that the bristles spread towards the edges of the nail and apply the varnish towards the free tip of the nail. Varnish the tip of the nail if the length of the nail is sufficient. Cure UV 2min or LED 30-60sec. 5 Shake the color varnish well before use and roll the excess varnish into the inner neck of the bottle. Apply a thin layer of varnish to the nail, starting from the middle of the nail and push the brush towards the cuticle line. Press the brush lightly so that the bristles spread towards the edges of the nail and apply the varnish towards the free tip of the nail. Take a drop of varnish on the brush and spread the varnish on the nail with quick strokes so that the brush is flat and not upright. Varnish the tip of the nail if the length of the nail is sufficient. Cure UV 2min or LED 30-60sec. 6 Apply a second layer of color polish to the nail, starting from the middle of the nail and pushing the brush towards the cuticle line. Press the brush lightly so that the bristles spread towards the edges of the nail and apply the varnish towards the free tip of the nail. Take a drop of varnish on the brush and apply the varnish on the nail with quick strokes so that the brush is flat and not upright. Varnish the tip of the nail if the length of the nail is sufficient. Cure UV 2min or LED 30-60sec. With the right technique, the varnish should be completely covering in two layers. If you are not successful, you can add a third layer if necessary. 7 Apply a thin layer of BLUESKYN No-wipe gel top coat to the nail, starting from the middle of the nail and pushing the brush towards the cuticle line. Press the brush lightly so that the bristles spread towards the edges of the nail and apply the varnish towards the free tip of the nail. Varnish the tip of the nail if the length of the nail is sufficient. Cure UV 2min or LED 30-60sec. No-wipe topcoat does not need to be wiped after curing. 8. Apply cuticle oil and you're done.
Ingredients : Bis-hema polycaprolactone Diol/Ipdi Copolymer, Hydroxypropyl Methacrylate, Trimethylolpropane, Triacrylate, Ethyl Trimethylbenzoyl Phenylphosohinate, Bis-Trimethylbenzoyl Phenylphosphine Oxide, BHT, Tin Oxide. May Contain: Mica, CI 15850, CI 77891, CI 77491, CI 77510, CI 77289, CI 77492, CI 77499, CI 77742