BrightSolar MPPT 30A charge controller with LCD display
The 30A MPPT type LCD charge controller enables good efficiency for the solar cell system. The regulator is suitable for 12V battery systems / max 360W solar panels and 24V battery systems / max 720W panels.
Shipping costs starting from
4,90€
MPPT type charge controller with LCD display. The MPPT controller charges with up to 35% better efficiency than traditional PWM controllers.
30A MPPT controller is suitable for 12V battery systems max. 360W for panels, and 24V in battery systems max.
720W for panels.
MPPT technology automatically adjusts the voltage and current ratio to suit the battery. The efficiency of the operation depends on factors such as the amount of light, the temperature and the type of solar cells. Optimal operation is constantly monitored using the device's internal microprocessor, so the MPPT system always gets the battery charged as efficiently as possible. When the battery's maximum charging voltage has been reached, the controller automatically switches off the charging current. The microprocessor also monitors all important security functions.
Technical information:
30A MPPT controller is suitable for 12V battery systems max. 360W for panels, and 24V in battery systems max.
720W for panels.
MPPT technology automatically adjusts the voltage and current ratio to suit the battery. The efficiency of the operation depends on factors such as the amount of light, the temperature and the type of solar cells. Optimal operation is constantly monitored using the device's internal microprocessor, so the MPPT system always gets the battery charged as efficiently as possible. When the battery's maximum charging voltage has been reached, the controller automatically switches off the charging current. The microprocessor also monitors all important security functions.
Technical information:
- MPPT technology that provides good efficiency for solar cell system
- Two entrances for panels
- The LCD screen shows e.g. the battery voltage, the current produced by the panel, the actual amperes, etc.
- Automatically detects the 12/24V system voltage
- Max input voltage: 20-60V/30-90V
- Temperature-dependent correction of charging parameters
- Full electronic protection (polarity protection, overcurrent, short circuit, overheating, power cut, lightning protection, etc.)
- Switchable load output
- Efficiency: >95%
- Battery types: GEL, AGM, WET
- Consumption with load: 130 mA, active consumption 15 mA
- Protection: IP20
- Dimensions: 17.5 x 19.5 x 9.5 cm (W x D x H)
- Note the instruction manual of the package incorrectly says Rs232 from the communication interface, this is not present in the controller.
- Warranty: 1 vuosi
- EAN: 6438014247090
- SKU: 102247932
- Vendor material number: 102247932
Payment Methods:
