DD Audio UE-12.2 2x12" subwooferkotelo
• Complete housing for 2x12″ subwoofers
• Good flowing port
• Tuning frequency: 35Hz
• Volume: 108L
• Mounting hole: 280mm
• Good flowing port
• Tuning frequency: 35Hz
• Volume: 108L
• Mounting hole: 280mm
Volume, L:
108
Available online only
Shipping costs starting from
10,90€
2x12″ DD Audio ready case.
The case is covered with black felt and the DD-Audio logo is on the top side. There is a durable metal protective grill on the front, which prevents impacts to the element in the trunk of the car.
On the side of the case there is a well-flowing port, as well as print terminals. Tuning frequency of the enclosures: 35Hz. The cases are made of durable 19mm MDF board.
Case volume 108L
Note! The housing is designed for elements with a sheet metal frame, and the mounting hole for the element is therefore 280mm.
DD Audio's cast-frame elements are not suitable for this case.
Note! The case comes with only 4 pre-installed protective grille screws. (required amount 18 pcs)
Ported enclosure for 2x12″ subwoofer
Net volume: 108 liters.
Tuning frequency: 35 Hz
Diameter of speaker hole: 280mm
Measurements cm: ( W x H x D ): 927 x 406 x 508.
Note! The enclosure is designed for subwoofers with a sheet metal frame, and the mounting hole for the element is therefore 280mm.
DD Audio's cast-frame subwoofers are not suitable for this enclosure.
Note! The enclosure comes with only 4 pre-installed protective Grille screws. (required amount 14 pcs)
The case is covered with black felt and the DD-Audio logo is on the top side. There is a durable metal protective grill on the front, which prevents impacts to the element in the trunk of the car.
On the side of the case there is a well-flowing port, as well as print terminals. Tuning frequency of the enclosures: 35Hz. The cases are made of durable 19mm MDF board.
Case volume 108L
Note! The housing is designed for elements with a sheet metal frame, and the mounting hole for the element is therefore 280mm.
DD Audio's cast-frame elements are not suitable for this case.
Note! The case comes with only 4 pre-installed protective grille screws. (required amount 18 pcs)
Ported enclosure for 2x12″ subwoofer
Net volume: 108 liters.
Tuning frequency: 35 Hz
Diameter of speaker hole: 280mm
Measurements cm: ( W x H x D ): 927 x 406 x 508.
Note! The enclosure is designed for subwoofers with a sheet metal frame, and the mounting hole for the element is therefore 280mm.
DD Audio's cast-frame subwoofers are not suitable for this enclosure.
Note! The enclosure comes with only 4 pre-installed protective Grille screws. (required amount 14 pcs)
- EAN: 850054251169
- SKU: 103433556
- Vendor material number: DDUE-12.2
Payment Methods:
