Entrade vibration damper Spring set 4 pcs/pss, maximum load 70 kg.
With the help of vibration damper springs, the noise and vibrations of the air heat pump and air-water heat pump can be controlled. The Entrade vibration damper spring series has particularly good damping performance and is suitable for all types of heat pumps. The steel springs are suitable for all ground, wall and plinth mounting brackets and they absorb vibration significantly better than traditional rubber sets.
Features and installation
load capacity 70 kg
includes two softer springs SP770-05 and two harder springs SP770-06
harder springs are installed on the heavy end of the outdoor unit and softer springs on the light end of the outdoor unit
includes mounting bolts and washers
spring dimensions unloaded: height approx. 63 mm and diameter 43 mm
Commonly used vibration dampening rubbers have a tendency to harden, especially in freezing weather, and in this case the vibrations and resonant sounds of the outdoor unit are carried along the building's structures into the interior spaces too strongly. Since the springs do not harden in the cold, their damping power remains the same regardless of the conditions. The vibration damper spring kit can also be installed in place of the rubbers afterwards. If the outdoor unit is really heavy, the compressor end may sag a little more than the light end. The position of the outdoor unit can be corrected with additional washers for the heavier end.
EAN:
7071583000063
SKU:
103177732
Vendor material number:
ATN208
???INV_AVAILABILITY_IN_STORES???
Select attributes to see availability
Huom! Tuotteiden myymäläsaldot vaihtelevat nopeasti, eikä myymäläkohtaista saatavuutta voida täysin taata. Viimeinen kappale voi olla myös "malli".