Klippel optimization has been used in the design of Hydrogen SPL elements. During the 10-hour testing, the behavior of the element is studied with numerous measurement results, and thus the weak points and problems that require improvement are found already in the early design phase. The element is fired with up to four times the power compared to its power duration. The end result is an element with a very even impedance response, i.e. it receives power well at all frequencies, has good sensitivity and withstands power properly.
If you want to play LOUD, the Hydrogen SPL is an excellent choice as an element. A solid and well-breathable cast frame holds the element together and allows the subwoofer to breathe properly through the frame. Functional voice coil ventilation and sufficiently robust voice coil keep the operating temperature of the coil correct even during heavy use. The double lower suspension controls the movement of the cone and the fastening of the upper suspension and the cone, which is secured by stitching, can withstand even a more violent trajectory. 8″ subwoofer 2x2 ohm voice coils 2.5″ copper voice coil Mounting diameter 187 mm Mounting depth 145 mm Aluminum cast basket Klippel optimized triple magnets Cone Reinforced paper Power Handling 700 W RMS, 1500 W SPL Power Sensitivity 80 dB Xmax 40 mm Fs 38.3 Hz Qts 0.381 Left 4.77 L.
EAN:
4037072021301
SKU:
103374820
Vendor material number:
GZHW 20XSPL-D2
Only available in the online store, not available in classic stores