Helix M SIX DSP is a top-quality 6-channel full-range DSP amplifier. This DSP amplifier's filters and control options are so versatile and extensive that they allow for virtually unlimited installation possibilities.

Power:
6-channel: 6 x 100W/rms (4 Ω)
6-channel: 6 x 100W/rms (2 Ω)
5-channel: 4 x 100W/rms + 1 x 200W/rms (4 Ω)
3-channel: 3 x 200W/rms (4 Ω)

- @ 4 Ohms6 x 100 Watts

- @ 2 Ohms6 x 100 Watts

- @ 1 Ohm-

- bridged @ 4 Ohms3 x 200 Watts

- bridged @ 2 Ohms-

Max. output power per channel*Up to 130 Watts RMS @ 4 / 2 Ohms

Amplifier technologyClass D

Inputs6 x RCA / RCA Cinch

6 x Highlevel speaker input

1 x Optical SPDIF (12 - 96 kHz)

1 x Remote In

Input sensitivityRCA / RCA 1 - 4 Volts

Highlevel 5 - 20 Volts

Input impedance RCA / RCA22 kOhms

Input impedance highlevel9 - 33 Ohms or 20 kOhms

Outputs6 x Speaker output

4 x RCA / RCA

2 x Remote Out

Output voltage RCA / RCA6 Volts

Frequency response20 Hz - 22,000 Hz

DSP resolution64 bit

DSP power295 MHz (1.2 billion MAC operations/second)

Sampling rate48 kHz

DSP typeAudio signal processor

Signal-to-noise ratio digital input105 / 108 dB Speaker / Line Output (A-weighted)

Signal-to-noise ratio analog input102 / 105 dB Speaker / Line Output (A-weighted)

Distortion (THD) 0.03 / 0.005 % Speaker / Line Output

Damping factor100

Operating voltage10.5 - 16 Volts (max. 5 sec.down to 6 Volts)

Idle current1950 mA

Max. remote output current500 mA

Fuse2 x 35 A Maxi-fuse (APX)

Power ratingDC 12 V ⎓ 80 A max.

Additional featuresADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input

Dimensions (H x W x D)50 x 320 x 154 mm /

2.00 x 12.60 x 6.06".