The product description make sure that all paint cans are the same batch (batch) or, alternatively, mix different batches to avoid shade differences.
Instructions for use: Remove the concrete layer of concrete adhesive from new surfaces with surface grinding. Remove loose paint and other dirt from previously painted surfaces by mechanically or sandblasting. Wash the oil and fat thoroughly. After washing, rinse the surfaces and allow to dry. For priming, thin the floor paint with 15-20 %thinning. With an unspoiled or slightly thinned Ilves floor paint. Mix the paint well before use.
Survival: Dense previously painted surface 9-11 m²/l, new unpainted concrete surfaces (steel massage) 1st floor 5-7 m²/l, 2nd floor 7-10 m²/l.
Drying time: Dust dry 1-2 hours. Top painting after about a day. For heavy exertion, deployment after 2-3 days. The indicative drying time is measured under standard conditions at +23 ° C and the relative humidity (RH) is 50 %. If the humidity is higher and the temperature is lower, the drying time of the paint will increase.
Gloss: shiny.
Thinning and tool washing: Lacquerzin. Working conditions: The surface to be treated must be dry and dust -free. Air temperature at least +5 ° C and relative humidity less than 80 %.
Transportation and storage: transported upright and supported. Protected from freezing. Keep out of reach of children.
Shades: gray
Pack sizes: 0.9 l, 2.7 l
Warning and Content Information: Flammable liquid and steam. May cause drowsiness and dizziness. Repeated exposure can cause skin drying or cracking. Store out of reach of children. Protect against heat, hot surfaces, sparks, open fire and other ignition sources. No smoking. Avoid breathing in the vapor/spray of dust. If the chemical is on the skin: wash with plenty of water. Contact the poisoning information center or doctor if nausea occurs. Dispose of the content / tank at an approved waste treatment plant in accordance with local regulations. Includes: Hydrocarbons, C9-C11, N-Alkanes, Isalkanes, Cyclics, <2% Aromatics.
Painting Product Group 2012: 655 1-component, solvent-borne top coat RL 03.
EU limit value: This product contains up to 500 g VOC/l. The limit value is 500 g VOC/L (class A/i).

H226 Flammable liquid and steam. /Brandfarlig Vätska och Ånga. H336 can cause drowsiness and dizziness. /Kan Göra Att Man Blir Dåsig Eller Omtöcknad.