The Jasu Kaira and sonar stand is our latest innovation to make the life of an ice fisherman easier and a comfortable hobby.
The auger holder holds the ice auger and echo sounder in their respective places when moving to the sampling sites.

The auger stand is attached to the block/box with a sturdy fastening jack and wing nuts. The stand fits the more common ice poles on the market.

There is a 40mm wide groove on top of the rack for transporting augers of different sizes. The end edges of the groove are protected with a rubber seal so that the paint surface of the auger is not damaged during transport. The front edge of the groove is lowered, so that the auger rests firmly against the bottom of the stick.
There are several mounting holes on top of the stand, which allow you to securely fasten the sonar in place. The sides of the rack also have mounting grooves for Jasu ice rod racks.

A fish bucket or cooler can be placed under the stand. There is a fish hatch on the back wall, from which you can put the fish in the container below the rack.

A rubber pad is placed on the front edge of the drill stand, which prevents the bottom of the stick from being scratched from the inside.

Dimensions:
Height from the bottom of the slat to the top of the stand 52cm
The width of the upper part is 37 cm
The length of the upper part is 29cm
Fish hatch 10x20cm
Borehole width 40mm