With LumoX EkoAir, cleaner and more energy-efficient wood burning
Common problems with old fireplaces are: high consumption of wood, too poor a draft, too strong a draft, sooting of the hatch, difficult lighting and, of course, emissions. Do any of the above-mentioned problems sound familiar and do you want to get rid of them, or would a cleaner burn and saving wood be in order? With this air controller designed by a Ylivieska firefighter, you make combustion cleaner and improve the efficiency of your fireplace.
Don't throw heat at magpies In older fireplaces, the mixture between air and combustion gases is not optimal, because the combustion air comes directly under the trees cold. Because of this, burning is unclean and most of the harmful flue gases are transported as unburned waste heat, pollution to the environment and nuisance to the neighborhood. LumoX EkoAir is an additional device (air guide) that can be placed in the hearth of the fireplace, whose patented fire technology directs the preheated combustion air to the right place, i.e. to the flue gases over the trees. Preheated air does not cool the flue gases, and if controlled correctly, the flue gases can be burned in the firebox. Thanks to this, the combustion is clean and, according to research, a large part of the small particle emissions is burned away. When the wood burns cleanly, the combustion phase is clearly calmer, and as a result, less wood is consumed.
Savings on firewood, which can be up to 40% at best!
Smoke nuisances coming under control The useful device is also important for urban and residential areas, as the smoke and smoke from the chimney is almost completely removed. Cleaner combustion extends the life of the fireplace and chimney. In addition, it reduces the formation of soot. At the same time, the amount of ash and other combustion waste is reduced thanks to clean combustion.
Everything thanks – the environment, the neighbors, the fireplace and the wallet.
What is the device suitable for? LumoX EkoAir is suitable for almost every storage fireplace that takes combustion air from below and does not have a CE mark. Such fireplaces are all bricked-in-place fireplaces. If the fireplace is factory-made, it must have been manufactured before 2013.
The size of the fire pit must be at least: Width 170 mm, Height 200 mm, Depth 300 mm
How to install the device? LumoX EkoAir installation is very simple. The device is placed in the hearth of the fireplace on top of its own grate, so there is no need to make any changes to the fireplace. The sales package contains everything necessary. Assembly is done with a 13 mm spanner, which can be found in the package. Clear instructions for use and installation are also included. Easy!
How is the device used, and where is the ash removed? Using the device is easy, but it takes a bit of getting used to, as a large number of fireplace users are used to a rather violent combustion event with a hard pull. LumoX EkoAir clearly calms the combustion, the device is used with the fireplace's own controls and the device's control damper. Ash removal is easy by removing the ash from the opening into the fireplace's own ash box.
Warranty:
2 vuotta
EAN:
6409310023206
SKU:
102319772
Vendor material number:
LUMOX00102
???INV_AVAILABILITY_IN_STORES???
Select attributes to see availability
Huom! Tuotteiden myymäläsaldot vaihtelevat nopeasti, eikä myymäläkohtaista saatavuutta voida täysin taata. Viimeinen kappale voi olla myös "malli".