A cold/warm bag for food or building materials that require a certain storage temperature, e.g. for storing, cooling, heating and transporting adhesive and sealing compounds.

The spacious 29-liter bag can be used either battery-operated or mains-powered. 4 terminals for batteries (2 for XGT® 40V batteries and 2 for LXT® 18V batteries), but the bag only uses one battery at a time. 40V and 18V batteries can also be used crosswise, in which case the bag will primarily draw power from the 40V battery. When using mains power or a 12V cigarette lighter, the bag automatically restarts if the power goes out, e.g. due to the electric roof or the car being turned off. Mains power and cigarette lighter adapters are delivered with the bag.

The bag can be divided into two different compartments with the help of an insulating inner wall. The temperature difference between the compartments can be up to 30° degrees. The inner wall can also be removed and in this case the entire space can be used for one selected operating temperature. The temperature can be selected from 17 different settings between -18 and +60 degrees.

The device uses power only when running and e.g. if a temperature of 10 degrees is aimed for, it is cooled down to an internal temperature of approx. 8 degrees. After this, we switch to sleep mode and the compressor starts again when the internal temperature rises to 11 degrees.
Operating time with two XGT® 40V 5.0Ah batteries 12.5 hours at -18 degrees, 30 hours at +5 degrees and 11.5 hours at +60 degrees when the outside temperature is approx. +20 degrees.
The bag's insulated lid can be opened on both sides or it can be removed completely.

A separate grid and compartment are also included, which can be used to separate the products into different parts of the bag.

Polyurethane foam as insulation material. Compressor refrigerant 26g R1234yf.