Mitek pipe pillar shoe
Price
Price of the product when purchased separately:
29,90 €
- 36,90 €
Choose Size, mm;
Select Size, mm above to see availability.
Shipping costs starting from
4,90€
Mitek pillar shoe, adjustable tube model
Pipe column legs are used in wooden structures as a foundation connection that transmits vertical loads, so that the adjustable lower end of the tube column leg is attached to the concrete foundation with wedge anchors, for example, and the upper end is attached with screws or nails to a wooden column or horizontal beam. The wooden parts can be sawn timber, glulam, LVL, CLT or planed, lamella, or round timber. In connection with a horizontal log, the surface of the log should be straightened so that the end plate of the pillar leg or the bottom flange of the supporting iron rests on the wood on its entire surface. If necessary, the round logs are notched or the pontoons are removed from the profiled log.
Pipe column legs can be used in wooden constructions of usage classes 1, 2 and 3 according to Eurocode 5. If the structure is in long-term conditions where the corrosion stress is greater than ISO 9223 class C1 (EC5 use class 2-3), the threaded rod parts of the lower end of the pipe column legs must be completely cast into the concrete with a protective distance of 50 mm. If the threaded rods are hot-dip galvanized, protective casting is not required. When attaching pressure-treated timber, the connectors must be made of stainless steel.
INSTALLATION: The pipe pillar legs are installed vertically so that the adjustment leg is at the lower end of the pipe pillar leg. The upper end of the pipe pillar leg must be horizontally supported in all directions. The end plates of the pipe column legs are attached to the wooden parts centrally from all holes in the plate with screws or nails. The length of the pipe pillar leg is adjusted so that no more than 90 mm of the threaded rod can be visible. Fastening the wooden pillar with 8 mm diameter cover screws or similar fasteners. Fastening to concrete with 7 mm diameter bolts or similar fasteners.
Pipe column legs are used in wooden structures as a foundation connection that transmits vertical loads, so that the adjustable lower end of the tube column leg is attached to the concrete foundation with wedge anchors, for example, and the upper end is attached with screws or nails to a wooden column or horizontal beam. The wooden parts can be sawn timber, glulam, LVL, CLT or planed, lamella, or round timber. In connection with a horizontal log, the surface of the log should be straightened so that the end plate of the pillar leg or the bottom flange of the supporting iron rests on the wood on its entire surface. If necessary, the round logs are notched or the pontoons are removed from the profiled log.
Pipe column legs can be used in wooden constructions of usage classes 1, 2 and 3 according to Eurocode 5. If the structure is in long-term conditions where the corrosion stress is greater than ISO 9223 class C1 (EC5 use class 2-3), the threaded rod parts of the lower end of the pipe column legs must be completely cast into the concrete with a protective distance of 50 mm. If the threaded rods are hot-dip galvanized, protective casting is not required. When attaching pressure-treated timber, the connectors must be made of stainless steel.
INSTALLATION: The pipe pillar legs are installed vertically so that the adjustment leg is at the lower end of the pipe pillar leg. The upper end of the pipe pillar leg must be horizontally supported in all directions. The end plates of the pipe column legs are attached to the wooden parts centrally from all holes in the plate with screws or nails. The length of the pipe pillar leg is adjusted so that no more than 90 mm of the threaded rod can be visible. Fastening the wooden pillar with 8 mm diameter cover screws or similar fasteners. Fastening to concrete with 7 mm diameter bolts or similar fasteners.
- Dimensions:
- Dimensions 250 : (A x W x D / D x H) 110 x 110 x 4 / 60 x 250+ mm - Weight 2.4 kg
- min. 268mm / max. 352 mm
- Dimensions 300 : (A x W x D / D x H) 110 x 110 x 4 / 60 x 300+ mm - Weight 2.5 kg
- min. 318mm / max. 402mm
- Dimensions 450 : (A x W x D / D x H) 110 x 110 x 4 / 60 x 450+ mm - Weight 2.6 kg
- min. 468mm / max. 552 mm
- Dimensions 600 : (A x W x D / D x H) 110 x 110 x 4 / 60 x 600+ mm - Weight 3.0 kg
- min. 618mm / max. 702mm
- Dimensions 250 : (A x W x D / D x H) 110 x 110 x 4 / 60 x 250+ mm - Weight 2.4 kg
- Holes Ø: 8 mm
- Material: Hot-dip galvanized steel DC01 EN-10130, Zinc plating EN ISO 10684
- EAN:
- SKU:
- Vendor material number:
Payment Methods:
