NiSi ND-Vario 1-5 Stops True Color 40.5 mm filter
Available online only
Shipping costs starting from
4,90€
NISI FILTER ND-VARIO 1-5 Stops True Color is a variable neutral density filter that reduces exposure by 1-5 EV.
The density, the ND factor, is infinitely adjusted by turning the filter.
Density is easily adjusted by turning the front filter ring with or without the included silver lever, helping you determine in advance the length of additional exposure needed.
This filter has built-in stops when turned to end positions so you know "where you are" during operational use.
To make control of the density settings easier and repeatable, the front ring is visually marked with numbers describing different stop values. The tire has silver side clamps that guarantee a secure grip and easy installation and removal.
If you use this filter with film or video cameras, the combined adjustments of aperture and this filter allow fine adjustments of depth of field while maintaining the specified frame rate.
Very useful for both photography and videography as you can precisely adjust the amount of light entering the lens in each scene.
In this way, larger apertures and/or longer shutter speeds can be used than would otherwise be possible under current lighting conditions.
The advanced nano coating repels water, grease and dirt and makes the filter easier to clean.
A thin filter ring ensures that there is no risk of vignetting when the lens is used with wide-angle lenses.
The filter ring is made of high-quality aluminum, which creates a very light and strong filter.
Both a front guard and a nice little bag to store the filter are included.
For best results, we recommend using a variable ND filter on lenses with a focal length of 35mm or more (full frame).
A variable neutral density filter offers better control over exposure settings, allowing for slower shutter speeds and wider apertures.
A True Color result that avoids the color shift seen in other variable filters.
Variable 0.3-1.5 neutral density.
Reduces exposure by 1 to 5 stops.
A filter ring intended for adjusting the exposure range, with hard stops on both ends.
No "X" effect
High definition optical glass
Nano coating, waterproof and non-reflective coating.
An optional rotating lever that can be removed
Larger front thread to avoid vignetting with wider lenses
Front protection included
Small bag included
The density, the ND factor, is infinitely adjusted by turning the filter.
Density is easily adjusted by turning the front filter ring with or without the included silver lever, helping you determine in advance the length of additional exposure needed.
This filter has built-in stops when turned to end positions so you know "where you are" during operational use.
To make control of the density settings easier and repeatable, the front ring is visually marked with numbers describing different stop values. The tire has silver side clamps that guarantee a secure grip and easy installation and removal.
If you use this filter with film or video cameras, the combined adjustments of aperture and this filter allow fine adjustments of depth of field while maintaining the specified frame rate.
Very useful for both photography and videography as you can precisely adjust the amount of light entering the lens in each scene.
In this way, larger apertures and/or longer shutter speeds can be used than would otherwise be possible under current lighting conditions.
The advanced nano coating repels water, grease and dirt and makes the filter easier to clean.
A thin filter ring ensures that there is no risk of vignetting when the lens is used with wide-angle lenses.
The filter ring is made of high-quality aluminum, which creates a very light and strong filter.
Both a front guard and a nice little bag to store the filter are included.
For best results, we recommend using a variable ND filter on lenses with a focal length of 35mm or more (full frame).
A variable neutral density filter offers better control over exposure settings, allowing for slower shutter speeds and wider apertures.
A True Color result that avoids the color shift seen in other variable filters.
Variable 0.3-1.5 neutral density.
Reduces exposure by 1 to 5 stops.
A filter ring intended for adjusting the exposure range, with hard stops on both ends.
No "X" effect
High definition optical glass
Nano coating, waterproof and non-reflective coating.
An optional rotating lever that can be removed
Larger front thread to avoid vignetting with wider lenses
Front protection included
Small bag included
- EAN: 6972949372835
- SKU: 102903063
- Vendor material number: 117825
Payment Methods:
