Nitor® Facade wash Bleach is used for cleaning and power washing facades before painting, so that the new paint can adhere well to the surface.
A very sufficient sealer.
Effective grease, dirt and soot remover.
Can also be used for rough cleaning.
Whitening effect.
For outdoor use.
Coverage up to 50m² / liter
Purpose of use
Nitor® Façade cleaning Bleaching is an effective alkaline and bleaching cleaning agent, which is used for cleaning and power washing of facades before painting. Removes soot, grease and dirt so that the new paint can adhere well to the surface. Can also be used for rough cleaning.
Note! Makes shiny surfaces look matte.
Use
Sealant to be diluted: Dilute Nitor® Facade wash Bleaching agent according to the intended use. Before painting, the dilution ratio is 1:20, for dirty surfaces 1:10 and for very dirty surfaces 1:1.
Apply Nitor® Facade Wash Whitening agent with a brush or pressure sprayer. Leave it on for 5-10 minutes. Scrub with a brush if necessary. Rinse thoroughly with water. The pressure washer can be used for rinsing with care.
H225- Highly flammable liquid and vapour, H319- Strongly irritating to eyes, H336- May cause drowsiness and dizziness, H318- Causes serious eye damage, H290- May corrode metals, H314- Severely corrosive to skin and eyes, H335- May cause respiratory irritation.
H225- Mycket brandfarlig liquid and steam, H319- Causes severe eye irritation, H336- Can cause serious eye irritation, H318- Causes serious eye irritation, H290- Causes serious eye irritation, H314- Causes serious eye irritation, H335 - Can cause irritation i luftvägarna.
{
"659545501": {
},
"659554001": {
}
}
EAN:
SKU:
Vendor material number:
???INV_AVAILABILITY_IN_STORES???
Select Volume, L above to see availability.
Huom! Tuotteiden myymäläsaldot vaihtelevat nopeasti, eikä myymäläkohtaista saatavuutta voida täysin taata. Viimeinen kappale voi olla myös "malli".