Petzl Croll S 8-11 mm ascent belay

A compact and very light rope gripper for 8-11 mm ropes to be installed on the harness at the belly. Designed for arborists, rescue professionals and rope access rope workers who work in hard-to-reach conditions and for sports use. Used together with the Petzl Ascension handle or the Basic ascent grab for climbing along a rope. This model is 30% smaller and 30% lighter than the Croll L.

Attaches from the lower end attachment hole to the textile loop of the front attachment point of the hip belt to the harness (e.g. Petzl Avao Sit, Falcon or Sequoia SRT) with a Delta quick connector or Omni locking ring. The lower attachment point is angled to keep the device flat against the chest. Installed in the correct position against the chest with the Petzl Secur shoulder strap (product no. C74A) and the back of the shoulder strap is connected to the harness at the rear attachment point of the lap belt.

The low-friction gripper spikes made of stainless steel, the cleaning groove and the ergonomic latch make it easy to use even in the most demanding conditions (when the rope is icy, muddy, etc.), enable a more efficient ascent from the first few centimeters, and make the product very long-lasting with the new stainless steel friction plate of the rope channel. Suitable for use with 8-11 mm diameter core ropes according to standards EN1891 and EN 892. CE EN567 and EN12841 nitrogen B and UIAA.

• Weight: only 85 g
• Material and manufacturing defect warranty 3 years
• Maximum lifetime unlimited