Battery operated version of the very popular PWC 3000 internal combustion engine winches. Uses an 82V battery which is available separately. Easy deployment. Compatible with Cramer 82V garden tool batteries.
Popular Portable Winch PCW3000 now battery operated. Despite its lightness (9.5 kg), the towing capacity is enough for 1000 kg. The power source is a 1KW electric motor, for which an 80/82W 2-6 Ah battery is suitable. With a 2.5Ah battery, the operating time is approx. 45 minutes and with a 5Ah battery, approx. 90 minutes. Perfectly suited for shorter-term traction needs and, best of all, also for indoor use. Technical information:
Maximum capacity in direct pull 1000 kg
Maximum load through the block 2000 kg
Three speeds: Speed 1 - 8.1 m / min, Speed - 10 m / min, Speed 3 - 11.6 m / min
Rope diameter 10-13 mm
1kW 82V max electric motor with overload protection
3-speed gear transmission
Oil bath lubrication system
Water and dustproof according to IPX3 classification
Dimensions: 318 x 302 x 310 mm
Sold without battery and charger. Battery and charger sold separately.
List of suitable batteries:
GREENWORKS PRO 80V – 2Ah GREENWORKS PRO 80V – 4Ah GREENWORKS COMMERCIAL 82V – 2.5Ah GREENWORKS COMMERCIAL 82V – 5Ah POWERWORKS 82V – 2.5Ah POWERWORKS 82V – 5Ah CRAMER 82V – 3Ah CRAMER 82V – 6Ah STIGA VOLTAGE 80V – 2.5Ah STIGA VOLTAGE 80V – 4Ah STIGA VOLTAGE 80V – 5Ah BRIGGS & STRATTON 82V MAX – 2Ah BRIGGS & STRATTON 82V MAX – 4Ah BRIGGS & STRATTON 82V MAX – 5Ah PORTABLE WINCH 82 V – 2.5 Ah
Important to remember when choosing equipment for winching
The maximum capacity of the winch must be much greater than the resistance of the average loads pulled by the winch. Correctly dimensioned loads extend the life of the winch and enable a momentary increase in the load, e.g. when a log hits an obstacle.
Whenever possible, use a running cone or a similar aid that reduces the friction of the platform and the risk of sticking.
The breaking strength of the steel wire or rope used in pulling should be at least 2 x greater than the maximum capacity of the winch used.
The breaking strength of the auxiliary pulley wheel should be at least 2.5 x greater than the maximum capacity of the winch used.
The breaking strength of the anchor belt to be attached to the pulley wheel or winch should be at least 3.5 times greater than the maximum capacity of the winch being used.
The diameter of the pulley wheel, calculated from the bottom of the groove, indicates the maximum diameter of the steel wire or rope to be used. The diameter of the steel wire or rope may be a maximum of 10% of the diameter of the wheel.
EAN:
690581017902
SKU:
102537491
Vendor material number:
E889
Only available in the online store, not available in classic stores