Front-facing and agile clearing saw for ATVs!

Rammy Brush cutter 120 ATV PROFESSIONAL's agile and efficient clearing saw for ATVs. The clearing saw is a powerful cutter for cutting all kinds of vegetation. It cuts grass, hay, willow, sedge and even 10 cm trees! You can drive against the ground with a clearing saw. There is a protective roll under the clearing saw and the blades are protected above the roll.

With the adjustable frame, the Rammy fits all 4×4 ATVs and UTV models. If the center mounting kit for the bumper plate is on the bottom of your ATV, the Rammy fits the current mounts.

Features:

Front mounted clearing saw & cutter.
Rammy is in front of the ATV, so visibility and handling is excellent. Cutting height adjustment is 2-10 cm with the rear roller. Even higher with a winch, up to 40cm.

Light and compact.
Rammy gets up with the ATV's winch. The cutter is attached to the ATV with two cotter pins in a center mounting kit, such as a snow blade (center mounting kit).

Briggs&Stratto engine.
The B&S 344 cm3 engine and maintenance-free transmission make the mower an efficient and reliable worker.

Blades for many uses.
6 horizontally rotating blades at 4000 r/min. Hinged to fold in the event of an obstacle, which reduces wear and damage to the blades. It cuts grass, hay, willow, sedge and even 10 cm trees!

Lateral transfer with a series increases the possibilities.
When the mower is equipped with a side shift kit (standard), the mower can be moved 32 cm to the left and right side.

Ready package for use.
The cutter is a ready-to-use package: 1. cutter, 2. adjustable accessory frame, 3. remote control. Each individual is test driven and inspected.

Technical information:

• Width: 1.2 m. Cutting width 1.15 m.
• Length and weight: 0.7 m. Clearing saw 90 kg, Auxiliary equipment frame 25 kg. Total weight 115 kg.
• Cutting principle: 6 horizontally rotating blades at 4000 r/min. Hinged to fold in the event of an obstacle, which reduces wear and damage to the blades.
• Cutting height: 2-10 cm adjustable with the lower roller.
• With a winch: 7-30 cm (depends on the ATV's front suspension and ground clearance).
• Engine: Briggs&Stratton Series 3 Intek 344 cm3. Torque 25 Nm. Gas tank 2.7 L.
• Starting: Lightened manual start
• Consumption: 1.5...2 L/h
• Attachment to the ATV: Bump plate lugs on the ATV, hole Ø10mm or 16...19mm with locking hooks, adjustable lug width 240-500mm (external dimension) and adjustable length 750-1250mm.
• Lifting/lowering: With the ATV's winch
• Remote control: Power switch
• Warranty: 2 years

Standard equipment:

• Adjustable auxiliary frame
• Adjustable roller
• Remote control
• Sharp hardened blades
• Side shift kit
• Front protection ring
• Reversible protective bumper

Capacity- 0-10 cm trees, Hay, grass, willow, bush. Usual driving speed approx. 5 km/h in thin vegetation