Robota DC-GP18V frame battery submersible pump

The Robota battery-powered submersible water pump is a convenient cordless choice for raising water from, for example, a well or rainwater barrel. The pump has a standard-sized tap connector to which you can connect a traditional watering hose with a quick connector. The pump works with Robota 18V batteries or Makita LXT 18V batteries. In the pump's separate battery unit, the battery is protected under the cover. The pump is connected to the unit with a power cord. For attaching the battery unit, the following are included: A convenient wall bracket that is screwed to the wall / flat surface. The unit detaches from the bracket without tools! A clip holder, with which the unit can be hung, for example, on a belt, on the side of a board or even on the edge of a record. The pump has a timer that can be used to schedule the pump to be turned off. When the pump is running, press the timer button, and the timer LED lights up.- Press 1 time: timing for 5 minutes- Press 2 times: timing for 10 minutes. Press 3 times: timing for 15 minutes. When the time is up, the pump turns off automatically. If you want to interrupt the timing, press the timing button again as many times as the timing LED turns off. NOTE! The pump is only intended for pumping water! Technical data: Voltage 18V Battery size min. 2Ah Output approx. 32L / min Lifting height max 5m Pump max immersion depth 1.8m With internal float. The water depth must be at least 90mm for the pump to work Power unit protection class IPX8