SteyrTek 2-pillar lift ST-40-2DUS 380V With one-hand mechanical safety lock
Available online only
Shipping starting from
89,00€
Enter your postal code
The price of the freight is determined based on the postal code. Enter your postal code and you will see what the freight costs for one product. You can see the total freight of several products in the shopping cart!
Freight for one product to postal code 84100 is 89,00€
You can find out the combined freight for several products by adding the desired products to the shopping cart.
SteyrTek ST-40-2DUS Double column lift
Opening the safety lock with one hand A new model from SteryTek. Now the opening of the mechanical safety lock works from a lever on the lifter's operating device. The lifter lowered significantly faster. An affordable, long-lasting and easy-to-use lift.
Very solid construction: pillars made of 5 mm steel, lifting arms made of 8 mm steel, telescopic arms of the lifting arms made of 6 mm steel.
The nylon sliding surface of the long-lasting and heat-resistant lifting slide is lubrication-free thanks to its macromolecular structure. Installation on a reinforced concrete floor of at least 120 mm. You don't need any fasteners to be installed on the casting. 10 holes are drilled in the floor, where the crane is attached with bolts (wedge or chemical anchor bolt). Lateral locking of the lifting arms with dynamic hydraulic pressure ensures safe and stable lifting. Thanks to the asymmetric structure of the lifting arms, there is room for opening the doors. In addition, door knock protection in both lifting carriages prevents knocks.
The strength of the crane's structures exceeds 5 tons, thanks to which the 3-ton payload is fully available. The power of the double hydraulic cylinders is transferred to the lifting carriages by a chain with a five-fold safety margin. A reliable mechanical lifting compensation system with steel cables ensures that the car does not tilt when lifting. Laser cutting of the frame material from one piece ensures consistent quality. The dynamic double cylinder design guarantees operational reliability.
Adjustable lifting jacks enable different types of cars to be lifted without damaging the rims. Easy-to-use, reliable and long-lasting mechanical safety lock that does not require compressed air. High quality and strong construction make SteyrTek stable and reliable.
Width measured from the inside of the pillars 2806mm
The maximum width of the car is 2570mm
The height of the feet from the ground in the lower position is 110 mm
110mm and 140mm interchangeable riser pieces are available as accessories.
Opening the safety lock with one hand A new model from SteryTek. Now the opening of the mechanical safety lock works from a lever on the lifter's operating device. The lifter lowered significantly faster. An affordable, long-lasting and easy-to-use lift.
Very solid construction: pillars made of 5 mm steel, lifting arms made of 8 mm steel, telescopic arms of the lifting arms made of 6 mm steel.
The nylon sliding surface of the long-lasting and heat-resistant lifting slide is lubrication-free thanks to its macromolecular structure. Installation on a reinforced concrete floor of at least 120 mm. You don't need any fasteners to be installed on the casting. 10 holes are drilled in the floor, where the crane is attached with bolts (wedge or chemical anchor bolt). Lateral locking of the lifting arms with dynamic hydraulic pressure ensures safe and stable lifting. Thanks to the asymmetric structure of the lifting arms, there is room for opening the doors. In addition, door knock protection in both lifting carriages prevents knocks.
The strength of the crane's structures exceeds 5 tons, thanks to which the 3-ton payload is fully available. The power of the double hydraulic cylinders is transferred to the lifting carriages by a chain with a five-fold safety margin. A reliable mechanical lifting compensation system with steel cables ensures that the car does not tilt when lifting. Laser cutting of the frame material from one piece ensures consistent quality. The dynamic double cylinder design guarantees operational reliability.
Adjustable lifting jacks enable different types of cars to be lifted without damaging the rims. Easy-to-use, reliable and long-lasting mechanical safety lock that does not require compressed air. High quality and strong construction make SteyrTek stable and reliable.
Width measured from the inside of the pillars 2806mm
The maximum width of the car is 2570mm
The height of the feet from the ground in the lower position is 110 mm
110mm and 140mm interchangeable riser pieces are available as accessories.
- EAN: 2050006010778
- SKU: 103092790
- Vendor material number: 130259
Payment Methods:
