Timco TIG250WSME pedal
Shipping costs starting from
4,90€
Ilmainen toimitus!
Practical foot pedal/pedal for TIG welding machines. Intended for starts and stops.
The maximum and minimum current can be adjusted from the welding machine's control panel. Equipped with two cables that connect to the front panel of the TIG welding machine.
In Remote OFF mode, the foot pedal works as an ON-OFF switch and in Remote ON mode, Base Current and Current are not used, adjustment range 0-250A
Length of both cables: 2.7 m
Connector 1: 2-pin connector
Connector 2: 3-pin connector
Product size: 27 x 15 x 19.5 cm
Weight: 3.1 kg
Suitable for products:
102222760 Timco TIG250WSME AC/DC Pulse Inverter 6438014227177
Note! Do not use on the Timco STIG250WSME Tig equipped with an LCD display.Using may damage the circuit board of the machine.
The maximum and minimum current can be adjusted from the welding machine's control panel. Equipped with two cables that connect to the front panel of the TIG welding machine.
In Remote OFF mode, the foot pedal works as an ON-OFF switch and in Remote ON mode, Base Current and Current are not used, adjustment range 0-250A
Length of both cables: 2.7 m
Connector 1: 2-pin connector
Connector 2: 3-pin connector
Product size: 27 x 15 x 19.5 cm
Weight: 3.1 kg
Suitable for products:
102222760 Timco TIG250WSME AC/DC Pulse Inverter 6438014227177
Note! Do not use on the Timco STIG250WSME Tig equipped with an LCD display.Using may damage the circuit board of the machine.
- EAN: 6438014288932
- SKU: 102477877
- Vendor material number: 102477877
Payment Methods:
