Wild&Mild G995 Gel Polish Starter Kit
Shipping costs starting from
4,90€
Wild&Mild Gel Polish Starter Kit - the perfect kit to start gel polish.
Contents:
A three-step UV gel varnishing method intended for home use. The surface of the nail does not need to be filed or roughened before use. A very shiny finish that lasts on the nail for a long time. The varnish can be removed easily and gently. Does not damage your own nails. Careful preparation of the nail extends the duration of Wild&Mild UV gel polish. Follow the instructions carefully.
Use:
1. NAIL PREPARATION Start by shaping the nails. Clean the surface of the nail from moisture, grease and dust with a cotton pad moistened with Wild&Mild Gel Polish Cleanser & Remover. Careful cleaning extends the duration of the gel polish.
2. BASE POLISH Apply a thin layer of Wild&Mild UV Gel Polish base coat to the nail. Harden the base coat by holding the nail for 60 seconds under the Wild&Mild LED lamp. After hardening, the surface of the nail remains sticky, which is appropriate. Do not touch or clean the surface of the nail. Make sure that the base, color or top coat does not get on the cuticle or the skin surrounding the nail, as this can cause the gel polish to come off. However, if the product accidentally gets on the skin, remove it carefully with an orange stick.
3. COLOR POLISH Apply a thin layer of Wild&Mild UV Gel Polish Color Coat to your nails and harden the varnish layer by holding the nail for 60 seconds under the Wild&Mild LED lamp. When all the nails have been varnished and hardened under the lamp, apply another layer of color varnish and harden it by holding the nail for 60 s under the Wild&Mild LED lamp. Please note that the surface of the nail remains sticky after curing, which is normal. Do not touch or clean the surface of the nail.
4. TOP COAT Apply a thin layer of Wild&Mild UV Gel Polish Top Coat to your nails and harden the varnish layer by holding the nail for 120 seconds under the Wild&Mild LED lamp. The top coat does not leave a sticky layer on the nail. Keep out of reach of children. Irritating to eyes, respiratory tract and skin. If the chemical gets into the eyes, rinse immediately with plenty of water and seek medical attention. Avoid contact with skin. May cause an allergic reaction. If an adverse reaction occurs, stop using the product.
5. REMOVING GEL POLISH FROM THE NAIL Dip the cotton pad all over in the gel polish cleaner and remover and place the cotton pad on the nail. Wrap your finger in foil and let the substance act for 15 minutes. If any gel polish remains on the nail, remove it carefully with an orange stick. Flammable liquid and vapor. Store below 25 °C. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. Keep out of reach of children.
Contents:
- Wild&Mild 6W UV/LED lamp
- Wild&Mild UV Gel Polish G991 Undercoat 7 ml
- Wild&Mild UV Gel Polish G992 Topcoat 7 ml
- Wild&Mild Gel polish Cleanser/Remover 50 ml
- Wild&Mild UV Gel Polish G130 Sundae Funday 7ml
- Wild&Mild UV Gel Polish G131 Summer Sorbet 7ml
- Wild&Mild UV Gel Polish G132 Ice, Ice Baby 7ml
- Orange stick
- Nail file
- Cleaning pads
A three-step UV gel varnishing method intended for home use. The surface of the nail does not need to be filed or roughened before use. A very shiny finish that lasts on the nail for a long time. The varnish can be removed easily and gently. Does not damage your own nails. Careful preparation of the nail extends the duration of Wild&Mild UV gel polish. Follow the instructions carefully.
Use:
1. NAIL PREPARATION Start by shaping the nails. Clean the surface of the nail from moisture, grease and dust with a cotton pad moistened with Wild&Mild Gel Polish Cleanser & Remover. Careful cleaning extends the duration of the gel polish.
2. BASE POLISH Apply a thin layer of Wild&Mild UV Gel Polish base coat to the nail. Harden the base coat by holding the nail for 60 seconds under the Wild&Mild LED lamp. After hardening, the surface of the nail remains sticky, which is appropriate. Do not touch or clean the surface of the nail. Make sure that the base, color or top coat does not get on the cuticle or the skin surrounding the nail, as this can cause the gel polish to come off. However, if the product accidentally gets on the skin, remove it carefully with an orange stick.
3. COLOR POLISH Apply a thin layer of Wild&Mild UV Gel Polish Color Coat to your nails and harden the varnish layer by holding the nail for 60 seconds under the Wild&Mild LED lamp. When all the nails have been varnished and hardened under the lamp, apply another layer of color varnish and harden it by holding the nail for 60 s under the Wild&Mild LED lamp. Please note that the surface of the nail remains sticky after curing, which is normal. Do not touch or clean the surface of the nail.
4. TOP COAT Apply a thin layer of Wild&Mild UV Gel Polish Top Coat to your nails and harden the varnish layer by holding the nail for 120 seconds under the Wild&Mild LED lamp. The top coat does not leave a sticky layer on the nail. Keep out of reach of children. Irritating to eyes, respiratory tract and skin. If the chemical gets into the eyes, rinse immediately with plenty of water and seek medical attention. Avoid contact with skin. May cause an allergic reaction. If an adverse reaction occurs, stop using the product.
5. REMOVING GEL POLISH FROM THE NAIL Dip the cotton pad all over in the gel polish cleaner and remover and place the cotton pad on the nail. Wrap your finger in foil and let the substance act for 15 minutes. If any gel polish remains on the nail, remove it carefully with an orange stick. Flammable liquid and vapor. Store below 25 °C. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. Keep out of reach of children.
- EAN: 4743080060392
- SKU: 103138927
- Vendor material number: G995
Payment Methods:
