Workshop Machinery

Grinding wheel size: 200 × 25.4 mm, center hole dia.: 15.88 mm, grits: K 36 / K 80
RPM: 2850 rpm
Power: 0.75 kW / voltage: 400 V

Grinding wheel size: 200 × 25.4 mm, center hole dia.: 15.88 mm, grits: K 36 / K 80
RPM: 2850 rpm
Power: 750 kW / voltage: 230 V

Disc size: 250 × 25.4 mm, center hole: 20 mm, roughness: K 36 / K 80
RPM: 2850 rpm
Power: 1.0 kW / voltage: 230 V

Grinding stone: 150 × 20 mm, center hole: 12.7 mm, grit: 36
Polishing disc: 150 × 12.5 mm
Steel brush disc: 150 × 12.5 mm
Speed: 2850 rpm, motor: 0.50 kW / 230 V

NTS 250 Top is suitable for wet and dry grinding and sharpening for many different purposes.

Grinding stone: 250 × 32 mm, center hole: 32 mm, grit: 36 / 80
RPM: 2850 rpm
Power: 2.0 kW, voltage: 400 V

Disc size: 150 × 25.4 mm, center hole: 12.7 mm, roughness: K 36 / K 80
RPM: 2850 rpm
Power: 500 W / voltage: 230 V

Grinding stone: 200 × 32 mm
Grinding stone center hole: 32 mm, grit: 36 / 80
RPM: 2850 rpm
Power: 1.25 kW / voltage 400V

Grinding stone: 200 × 32 mm
Grinding stone center hole: 32 mm, grinding stone grit: 36 / 80
RPM: 2850 rpm
Power: 1250W / voltage 230V

Disc size: 250 × 25.4 mm, center hole: 20 mm, roughness: K 36 / K 80
RPM: 2850 rpm
Power: 1.0 kW / voltage: 400 V

The stable gray cast iron construction of the DM 450 lathe guarantees vibration-free and precise work. The model can be equipped with an optional frame extension, thanks to which the tip distance increases to 980 mm.