Wurth 50g green flat sealer
Price
Price of the product when purchased separately:
22,90 €
(458,00 / kg)
Shipping costs starting from
4,90€
Soft/low strength
Easy to remove
Seals 100%
Fills the gaps completely, so it also protects against corrosion and rust caused by rubbing.
The bottle empties perfectly thanks to the accordion design that goes into the bottle
Resistant to many bases, gases, solvents, oils and fuels
Does not contain silicone, solvents or oil For sealing flanges and surfaces when the gap is no more than 0.3 mm. Replace solid seals. Soft/low-strength flange gaskets can be used, for example, in the automotive and commercial vehicle industry, metal and tool industry, shipbuilding, mechanical engineering, engine manufacturing, electrical and electronic industry, food and beverage industry, and pharmaceutical and paper industry.
Especially suitable for applications where good humidification is required. These include, for example, complex castings and smooth surfaces. This liquid plastic hardens when in contact with metal without the influence of oxygen (absence of oxygen). The contact surface must be dry, dust-free and grease-free. Moisten the surfaces to be locked sufficiently and connect them immediately.
For more information, see the technical data. Long-term exposure may cause changes in the following plastics: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, volcanic fiber and painted surfaces. For sealing flanges and surfaces when the gap is no more than 0.3 mm. Replace solid seals.
Warning signs, attention word, danger phrases and safety phrases are not needed
Easy to remove
Seals 100%
Fills the gaps completely, so it also protects against corrosion and rust caused by rubbing.
The bottle empties perfectly thanks to the accordion design that goes into the bottle
Resistant to many bases, gases, solvents, oils and fuels
Does not contain silicone, solvents or oil For sealing flanges and surfaces when the gap is no more than 0.3 mm. Replace solid seals. Soft/low-strength flange gaskets can be used, for example, in the automotive and commercial vehicle industry, metal and tool industry, shipbuilding, mechanical engineering, engine manufacturing, electrical and electronic industry, food and beverage industry, and pharmaceutical and paper industry.
Especially suitable for applications where good humidification is required. These include, for example, complex castings and smooth surfaces. This liquid plastic hardens when in contact with metal without the influence of oxygen (absence of oxygen). The contact surface must be dry, dust-free and grease-free. Moisten the surfaces to be locked sufficiently and connect them immediately.
For more information, see the technical data. Long-term exposure may cause changes in the following plastics: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, volcanic fiber and painted surfaces. For sealing flanges and surfaces when the gap is no more than 0.3 mm. Replace solid seals.
- Product length/depth: 5cm
- Product width: 4.8cm
- Product height: 11.4cm
Warning signs, attention word, danger phrases and safety phrases are not needed
- EAN: 4056807005218
- SKU: 103304098
- Vendor material number: 0893573050034 1
Payment Methods:
