Instantly sealing, so tightly tightened connections can be immediately loaded to a pressure of about 5 bar and after final hardening up to the pressure of breaking the pipe.

Medium - can be removed

Resistant to many bases, gases, solvents, oils and fuels

Sealant does not leak out of the thread

Quick and firm attachment

Accordion bottle with convenient dosing
Easy to use with one hand thanks to the convenient screw cap
Thanks to the continuously adjustable dosing cap, the dosing can be precisely adjusted to suit the need, so that consumption and costs remain as low as possible.
Easily removed product residues

Does not contain silicone, solvents or oil Seals conical/cylindrical threads of metal pipes according to the ISO 7.1 standard up to size R3.
Well suited for sealing connections, valves or threaded joints of metallic water pipes (also domestic water heating and cooling pipelines, sprinkler systems, etc.).
Can also be used to seal gasoline, diesel pipes or compressed air lines. The product is also suitable for sealing pressure regulators and oil separators in compressed air supply systems. This liquid plastic hardens when in contact with metal without the influence of oxygen (absence of oxygen). The connecting surfaces must be dry, dust-free and grease-free. Moisten the surfaces to be locked sufficiently and connect them immediately.
For more information, see the technical data. Copper or copper alloys speed up hardening considerably, so the sealing liquid can already start hardening during the joining process. This can cause micro-cracks that can lead to leaks. Therefore, it is highly recommended to carry out preliminary tests and thus ensure the success of the process, if the sealing liquid for pipe thread joints is used in copper connections that come into long-term contact with water at a temperature ≥ 40 °C. It is the user's responsibility to determine the suitability of the product for a specific application and attachment.
Prolonged exposure to the liquid product may affect the following plastics: ABS, celluloid, cellular polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (Luran, Tyril), Vinidur, volcanic fiber and painted surfaces.
Prohibited for use in domestic gas installations in Germany according to DVGW TRGI 2008. For sealing the threads of all metallic pipes and fittings conforming to the standard ISO 7.1 conical/cylindrical threaded joints up to size R3.

• Product length/depth: 4.7cm
• Product width: 4.7cm
• Product height: 11.4cm

CLP

Warning signs, attention word, danger phrases and safety phrases are not needed