Wurth DP300 80ml sealing glue for engines

Permanently elastic sealing glue for sealing the engine and housings. Good heat resistance and excellent sealing ability due to permanent molding properties (does not harden).

• The duration of the vibration can be guaranteed for years
• No stretching during application
• Does not pour on vertical or inclined surfaces
• Heat resistance –50°C…+270°C, temporarily up to +300°C
• Poor thermal conductivity
• No chemical adhesion to metals or other materials, prevents atmospheric corrosion
• Resistant to water, air, gasoline, kerosene, various oils, synthetic lubricants, water/glycol and methanol mixtures, anti-icing agents and coolants containing carbon fluoride
• Does not contain silicone

Non-toxic The surface must be clean, dust-free and grease-free. Clean the surfaces to be sealed with acetone cleaner Apply DP 300 engine and case sealing adhesive to one side (uneven surface on each side) and let dry for about 10 minutes. Then assemble the parts. Tighten the screw connection again after 10 minutes. No need to wait any longer! The instructions for use are recommendations based on our tests and experience. Always test the product yourself before use. Since there are many uses and the storage and use conditions vary, we cannot take responsibility for a certain end result. We are not responsible for the advisory services or technical information provided by our free customer service, except if these advisory services and/or technical information are included in contractual services binding us, or if the customer service employee acts intentionally wrongly. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development. Not suitable for sealing the oil sump.

Material combinations:
1. Metal - metal
2. Metal - plastic
3. Plastic - plastic

Markings:
2008/1272/CLP

Warning word: danger
H225 Highly flammable liquid and vapour.
H319 Severely irritating to eyes.
H336 May cause drowsiness and dizziness.

Marking information:
2008/1272/CLP

Signalord: fara
H225 Very flammable liquid and vapor.
H319 Orsakar serious eye irritation.
H336 Can cause dåsighet och yrsel.