Wurth Heat resistant 50g bearing lock

Very strong adhesive bond
The joint can only be opened after heating to 300 °C

High operating temperature, up to 200 °C
Strength at 100 °C still 85% of maximum strength

Fills gaps up to 0.2 mm
Completely fills the unevenness of the surface

Prevents wear caused by rubbing
Bearings do not cut

Hardens quickly

Good durability
Resistant to many bases, gases, solvents, oils and fuels (see resistance list)

Does not contain silicone, solvents or oil

DOS system:
The clever screw cap enables use with one hand, leaving the other hand free.
Thanks to the continuously adjustable dosing cap, the dosing can be precisely adjusted to suit the need, so that consumption and costs remain as low as possible.
The jar empties almost completely and no substance remains in the neck of the dosing cap, which improves cost efficiency. For fixing bushings, bearings and other cylindrical joints exposed to high temperatures. The bearing crystal is intended for use in the automotive and commercial vehicle industry, the metal and tool industry, shipbuilding, the manufacture of machines and engines, and the electrical and electronics industry. The composition follows the recommendation of the German Environmental Agency for products that come into contact with drinking water. This liquid plastic hardens when in contact with metal without the influence of oxygen (absence of oxygen). The connecting surfaces must be dry, dust-free and grease-free. Moisten the surfaces to be locked sufficiently and connect them immediately.
For more information, see the technical data. Long-term exposure may cause changes in the following plastics: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, volcanic fiber and painted surfaces. We always recommend testing the product yourself. For fixing bushings and bearings exposed to high temperatures.

• Product length/depth: 4cm
• Product width: 4cm
• Product height: 14.1cm

CLP

Warning word : Danger
Hazard statements : H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H412 Harmful to aquatic life, long-term adverse effects.