Wurth P05 250g abrasive polish

Innovative powdered aluminum oxide composition
The best possible efficiency thanks to the unique removal power, wonderful high gloss
Easily removes sanding marks from P1200-1500 grit

Thick texture
The polish doesn't splash around
Economical to use
Does not create much dust
The surrounding areas do not need to be cleaned again

Can be applied by hand or by machine

For normal and non-scratch paints

Suitable for old and new paint surfaces

Does not contain silicone. Coarse, highly abrasive, high-gloss polish for quickly correcting defects on fresh or completely hardened paint surfaces, as well as for polishing traces of use on old paint surfaces.
Paint surface preparation: Dust remaining on the paint, sanding grooves, orange surface, damage to the paint surface Shake well before use. Moisten the surface of the selected polishing pad/pad evenly with the paste and spread it a little on the surface to be polished as well. Place the polishing disc flat against the base and start the machine. Use a speed of 1,500 - 2,000 r/min and keep the pressure constant. Work the surface until the unevenness disappears. Work in parts! Remove excess polish with a microfiber cloth. Remove any remaining streaks with the Hologram Remover P30 Plus Polish.
Rotating 1,500 – 2,000 r/min
Eccentric 2,000 – -10,000 r/min We recommend that you use our green polishing disc with the polishing agent. A very coarse, fast-abrasive polishing agent that can remove deep scratches from new and old paint surfaces.

• Product length/depth: 17.5cm
• Product width: 5.3cm
• Product height: 5.3cm

CLP

Warning signs, attention word, danger phrases and safety phrases are not needed