Universal package with excellent features. Can be used as a filling pack and fine pack.
The edges do not break when sanded lightly. Due to the good flexibility, dense, even surfaces are obtained. Does not require re-treatment with fine packing. Enables quick further processing, which saves time (sanding, smoothing and surface painting)

Easy to sand, low dust formation

• Easy to use
• Simplifies further processing of the object
• Dries quickly
• Fills well and withstands loads
• Heat resistance up to 80°C

Tip 1
In order to achieve the best possible corrosion protection and strong adhesion, pre-treat the area with a two-component Multi-Filler primer before applying the package. (Do not use a one-component primer, because then the adhesion will be weakened.)

Tip 2
A small amount is enough. On a non-porous surface, the package should be applied in several thin layers.
VAKU 30 package maximum allowed VOC content: 250g/l in product category 2(b). Maximum permitted VOC content according to the German regulation on solvent-based paints and varnishes (ChemVOC FarbV): 0g/

Do not use on badly damaged surfaces.

Markings:
2008/1272/CLP

Word of caution warning
H242 Flammable when heated.
H317 May cause an allergic skin reaction.
H319 Severely irritating to eyes.
H410 Very toxic to aquatic life, long-term adverse effects.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P273 Avoid release to the environment.
P280 Use protective gloves/ protective clothing/ eye protection/ face protection.

Marking information:
2008/1272/CLP

Warning for attention
H242 Brandfarligt vid heating.
H317 Can cause allergic skin reaction.
H319 Orsakar serious eye irritation.
H410 Mycket giftigt för water-levande organismer med lättidseffekter.
P210 Förvaras åtskilt från värme / gnistor / öppna lågor / Heta ytor. Ingen rökning.
P273 Undvik övälät till miljön.
P280 Använd skyddshandskar/skyddsklader/ögonskydd/ansiktsskydd.