ZAPTEC PRO is an AC-powered wall or pole-mounted charging station designed and manufactured according to international standards for charging systems for electric cars (IEC 61851-1) and supports charging using charging method 3 (mode 3). Requires backplate CYZ675 for installation. Fuse size supports a maximum of 63 amp fuses (in series) for the circuit of the charging stations Connection box of the back plate electric cable cross-section 2.5-10 mm2 electrical cable diameter 10-20 mm2 Electrical network supported distribution systems TN, IT and TT 230 volt alternating current ±10% 400 volt alternating current ±10% Maximum electric current and charging power 7.36 kW* with 32A single-phase charging 22 kW* with 32A three-phase charging (only in TN system electrical networks) power consumption 5W in standby mode Fuses built-in 3 x 40A (type C) fuses Charging plug standard: EC 62196-2 Type 2 Female - additionally integrated self-closing plug protective cover Residual current protection built-in residual current protection (type B) residual current protection calibration and automatic testing before starting each charge the residual current protection can be automatically reset by disconnecting the charging cable from the plug Theft protection The front cover of the ZAPTEC PRO can only be opened with a special tool the charging cable can be locked to the charging station Dynamic load balancing The ZAPTEC PRO charging system balances the available electrical power between the charging devices in the system with a dynamic load and phase balancing system Dynamic phase compensation The ZAPTEC PRO charging system dynamically optimizes charging stations between single-phase and three-phase charging to maximize the available electrical power for the system's charging stations Network and cloud service connections of the system 4G LTE-M1, Wi-Fi 2.4 GHz IEEE 802.11 b/g/n (channels 1-11) PLC Module - HomePlug Green PHY 10Mbit/s (a standard optimized for smart electricity networks that uses 75% less electricity than the traditional HomePlug standard) Connections of identification and commissioning Bluetooth Low Energy (BLE 4.1) RFID/NFC reader (Mifare Classis, Type A) PLC module for the future communication interface of vehicles (Plug & Charge ISO15118 standard) Standards and type approvals CE approval covering the following directives: Radio Equipment Directive 2014/53/EU, ROHS Directive 2011/65/EU, IEC 61851-1 (TUV SÜD) and IEC 61851-22 Operating temperatures min. -30°C max. +50°C Protection IP54 rating protected for indoor and outdoor use (e.g. water splashes) IK10 impact protection rating protects against a hit equivalent to a 5 kg object falling from a height of 40 cm UL94 5VB fire protection rating, fire extinguishes within 60 seconds if the device catches fire UV protected electrical protection protection class II (additional insulation in the device in addition to basic insulation) type 3 surge protector Integration standards possibility to use third-party services: API, Webhooks, OCPP 1.6J (cloud-to-cloud) Demo of load and phase equalization: https://zaptec.com/downloads/incharge-demo/#4.
The Zaptec Pro charging station requires a separate base plate with SAP code CYZ675 for installation. The Zaptec Pro charging stations sold by Onninen require Onninen's technical support to open the charging field in the Zaptec Portal and allow access to the established Zaptec Pro charging field to start installation. Before the first product, an orientation is also given. The contact information is: evcsupport@onninen.com. Zaptec's technical support is not available for loading field openings and technical support inquiries go to the manufacturer through Onninen's support.
Warranty:
1 vuosi
EAN:
7090038510179
SKU:
103462627
Vendor material number:
CYZ674
Only available in the online store, not available in classic stores