Zaptec DBR283 Pro 22kW 3-phase charging station

Charging station basic charging Zaptec PRO 22kW, black, MID certified display on the front cover ZAPTEC PRO is an AC-powered charging station that can be installed on a wall or on a pole, which is designed and manufactured according to the standards of international charging systems for electric cars (IEC 61851-1) and supports charging using mode 3 (mode 3) loading. Display MID certified charging station. Requires backplate CYZ675 for installation.
The ZAPTEC PRO charging system balances the available electrical power between the charging devices in the system with a dynamic load and phase balancing system. Built-in 3 x 40A (type C) fuses.
Fuse size
Supports a maximum of 63 ampere fuses (in series) for the circuit of the charging stations
Connection box for the back plate
Electric cable cross-section 2.5-10 mm2
Electric cable diameter 10-20 mm2
Electricity grid
Supported distribution systems: TN, IT and TT
230 volt alternating current ±10%
400 volts AC ±10%
Maximum electric current and charging power
7.36kW* with 32A single-phase charging
22kW* 32A with three-phase charging (only in TN system electrical networks)
Power consumption 5W in standby mode
Charging plug
Standard: EC 62196-2 Type 2 Female - additionally integrated self-closing plug protective cover
Residual current protection
Built-in residual current protection (type B)
Residual current protection calibration and automatic testing before starting each charge. The residual current protection can be automatically reset by disconnecting the charging cable from the plug.
Built-in electricity meter: Directive-compliant (MID EN50470) electricity meter built-in and display on the front cover.
Theft protection
The front cover of the ZAPTEC PRO can only be opened with a special tool. The charging cable can be locked to the charging station.
Dynamic phase compensation
The ZAPTEC PRO charging system dynamically optimizes charging stations between single-phase and three-phase charging to maximize the available electrical power for the system's charging stations.
Network and cloud service connections of the system
4G LTE-M1
Wi-Fi 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)
PLC module – HomePlug Green PHY, 10Mbit/s (a standard optimized for smart grids that uses 75% less electricity than the traditional HomePlug standard)
Connections of identification and commissioning
Bluetooth Low Energy (BLE 4.1)
RFID/NFC reader (Mifare Classis, Type A)
PLC module for the future communication interface of vehicles (Plug & Charge ISO15118 standard)
Standards and type approvals
CE approval covering the following directives: Radio Equipment Directive 2014/53/EU, ROHS Directive 2011/65/EU, IEC 61851-1 (TUV SÜD) and IEC 61851-22
Operating temperatures
Minimum temperature -30°C
Maximum temperature +50°C
Protection
IP54 rating. Protected for indoor and outdoor use (e.g. water splashes)
IK10 impact protection rating. Protects against an impact equivalent to a 5 kg object falling from a height of 40 cm
UL94 5VB fire protection rating. The fire will go out within 60 seconds if the device catches fire.
UV protected
Electrical protection
Protection class II (additional insulation in the device in addition to basic insulation)
Type 3 overvoltage protection
Integration standards
The possibility of using third-party services
API, Webhooks
OCPP 1.6J (cloud-to-cloud)
Demo of load and phase balancing: https://zaptec.com/downloads/incharge-demo/#4.

The Zaptec Pro charging station requires a separate base plate with SAP code CYZ675 for installation. The Zaptec Pro charging stations sold by Onninen require Onninen's technical support to open the charging field in the Zaptec Portal and allow access to the established Zaptec Pro charging field to start installation. Before the first product, an orientation is also given. The contact information is: evcsupport@onninen.com. Zaptec's technical support is not available for loading field openings and technical support inquiries go to the manufacturer through Onninen's support.